M20 Smart card reader is indigenously developed high performance reader to read Mifare read only cards. It provides a consistent read range of 4~5 cm in most of the conditions. The reader is particularly suited to access control applications. The same basic unit can be configured to most common output interface formats, including Wiegand, Magstripe and RS-232 serial ASCII.
Access Control System
13.56 MHz Mifare reader that meets ISO 14443A standards
Suitable for door access control applications. It can be easily mounted on walls and doors
Reads both 32 bit Mifare CSN and Sector
Advance key management for high security
Compact and high aesthetics
Dual LED indications.
Weigand interface, compatible with most of the existing access control systems
| Read Range | Up to 4~5 cm in ideal conditions |
| Frequency | 13.56 MHz |
| Card | Mifare 14443A |
| Output Interface | Weigand 26~40 bits |
| Configuration | Field configurable through master card. Programmable sector keys |
| Input data formats | Character, HEX, BCD Nibble, BCD Byte,ASCII Decimal, ASCII Hexadecimal |
| Output data formats | Weigand and Weigand Reverse configurable form 26~40 bits |
| LED Control | Active low inputs to control the red LED |
| Buzzer Control | Active low inputs to control the buzzer |
| Tamper Output | Open collector active low |
| Input Voltage | 12 VDC |
| Input Current | 100mA @12VDC |
| Housing | ABS |
| Dimensions | 85(L) x 65(W) x 24(D) mm |
| Product Code | Description |
|---|---|
| M20 | Mifare Smart Card Reader |